Home » News » What is the standard outdoor billboard size?
What is the standard outdoor billboard size?
Ngày đăng: 09/03/2022
Each area in and out of the city will have different billboard size requirements. So what is the specific size of Billboard in each region? What should be noted when designing and constructing Billboard? AIT Group will answer your questions in the following article. See now!
1. Billboard size outside the urban area
Making billboards in Hanoi outside urban areas are areas with spacious space, suitable for installing Billboard billboards. Therefore, in areas outside urban areas, you will often encounter Billboard outdoor billboards with large sizes. The maximum size of Billboard in these areas can be up to 250 m2.
Below is a table of regulations on billboard sizes outside of urban areas in Circular 19/2013/TT-BXD that you need to know if you want to build this type of billboard.
Regulations of Circular 19/2013/TT-BXD on Billboard size outside urban areas
2. Inner city billboard design size
Billboard design size in urban areas will usually be smaller than those outside urban areas. Because it is affected by high-rise buildings, electrical wiring, etc., the size of the Billboard in this area will not exceed 80 m2.
2.1 Billboards in public areas
The public area is divided into separate zones with different regulations on billboard sizes. Specifically, the regulations on the size of billboard ads in each public area are:
- Areas on both sides of the road
- Billboards must stand independently, avoiding the phenomenon of standing close to each other causing danger when something goes wrong.
- Billboard signs must have a minimum height of 5m from the road surface to the lower part of the sea.
Two adjacent billboards must be at least 100m apart vertically on the same route.
- Overpass area
- Billboard signs are usually located on the inside of the overpass and are designed on two sides to ensure access to consumers.
- Billboard signs in the overpass area are usually mounted, hung on the wall or railing of the overpass instead of overhead to avoid affecting the visibility of traffic participants.
- Park area
- Billboard will usually not stand alone on the grounds of the park.
- The height of the sea must be at least 5 m from the edge of the road.
Billboard in public area made by AIT Group
2.2 Billboard advertising at individual buildings/houses
At individual buildings or houses, billboards are also designed according to the following rules:
- Billboard advertising boards at the facades of buildings/houses
- Billboard is designed horizontally: The billboard will be placed close to the balcony, the maximum height is 2 m. The width of the sea will depend on the width of the facade. Be careful not to let the edge of the sea overflow. Moreover, each floor of the building can only install 1 billboard.
- Billboard is designed vertically: The billboard must be placed close to the edge of the wall with a width of 1 m. The height of the sea will depend on the height of the facade but should not exceed 4 m. Only one vertical board can be installed on each floor of the building.
- Billboards mounted or hung on the walls of buildings/houses
- There is a difference compared to when installing billboards in the facade that can hang up to 2 boards. Billboards at this location will usually have a height of less than 5m and the length must not exceed the limit of the wall.
- For buildings and houses with less than 4 floors, billboards will not be hung above the roof floor by 1.5 m.
- For buildings and houses with more than 5 floors, billboards can only be hung from the side of the wall.
2.3 Regulations on the size of outdoor billboards in limited areas
Billboard at home made by AIT Group
3. Notes when designing and constructing billboards
In order to design and construct billboards in accordance with State regulations, you need to pay attention to the following factors:
- Size of billboards: Because each area will have a different billboard size regulation, you should find out carefully before designing and constructing.
- Outdoor billboards must be designed with clear, concise content and carry meaningful messages to make an impression on viewers.
- The color of the sea must be prominent and eye-catching to attract viewers.
- When conducting construction and installation, the safety factor must be put on top. In addition, you also need to ensure technical and timely handling measures when encountering unexpected problems.
Billboard outdoor advertising made by AIT Group
Above are the State regulations on billboard size that AIT Group has compiled. If you are in need of quality and outstanding billboard advertising design, please contact AIT Group immediately via hotline 0983 027 448 – 0913 318 464 or via website https://aitvietnam.com/!